dial indicator
英 [ˈdaɪəl ˈɪndɪkeɪtə(r)]
美 [ˈdaɪəl ˈɪndɪkeɪtər]
n. 标度盘指示器；千分表
双语例句
- Inspect the dimension of each mould using projector and height dial test indicator.
使用影像仪和高度百分表来检测每一个模具的尺寸。 - That's the dial below and right of the airspeed indicator.
即是速度计右下方的针盘。 - Traditional method detecting by dial indicator or feeler gauge needs more time and effort.
传统的检测方法是由百分表或触角衡量，需要更多的时间和精力。 - Pry the crankshaft forward, position the dial indicator to zero.
向前撬曲轴，定位针盘指示表到0。 - Their main advantage is that the measurement of the dimensions of workpieces can be made either by means of the dial indicator or by means of the micrometer head.
它的主要优点是：可以用微分筒一端和表头一端分别是进行工件尺寸的测量。 - This paper specifies the meaningfulness and measurement method of rotating machinery alignment and points out the main deviation factors of dial indicator alignment and its control method.
简述了旋转机械对中的意义和测量方法，指出了百分表对中法的主要误差因素及其控制方法。 - The measuring and analyzing result for a dial indicator indicated that dial indicators are inapplicable for measuring the high frequency signals, such as the run out of high speed rotating shafts.
对百分表样品的测试与分析结果表明，百分表不适用于高频信号（如高速旋转轴的跳动）的测量。 - A dial indicator gives a direct reading for ultra-fine flow adjustments in dispense volume settings enabling changing from one dispense volume to another with little or no downtime.
一个交互式显示器可以显示调整分配量时极其细微的流量调整变化，使得调整分配量变得非常简单。 - If an oil slinger is used behind the inner pinion bearing cone, deduct the thickness of the slinger from the dial indicator reading and use that total for shim selection.
如果抛油环用在内侧驱动小齿轮内圈的后面，从针盘指示表读数中扣除抛油环的厚度，垫片的选择用这个总数。 - This method was labour saving and cost saving. The Analysis of Normal Faults and Repairing Methords in Dial Indicator
此方法比通常的连锁分析法省时省力。百分表的常见故障分析以及修理方法 - Hold Differential Case and Read Dial Indicator
固定差速箱，并读针盘指示表 - Base on the working practice of length measurement implements checking and fixing, this paper summarize the indication error reason of dial indicator and the fixing measure.
文章根据从事长度计量器具检定和修理的工作实践，总结了千分表示值超差的原因和修理方法。 - A Fast Method How to Process the Verification Data of Dial Indicator Making Use of Excel
利用Excel实现百分表检定数据快速处理的方法 - The Analysis of Normal Faults and Repairing Methords in Dial Indicator
百分表的常见故障分析以及修理方法 - Analysis and Correction of Errors for Special Workpiece Measured by Dial Test Indicator
用杠杆千分表测量特殊工件的误差分析及校正方法 - The natural frequency and time of output stable signal of dial indicator are analyzed.
分析了百分表的固有频率特性和输出信号稳定时间。 - A kind of effective isolation measure has been taken in the module, and the module's parameters can be setup by dial switch, key-presses and indicator lights.
其内部采用了有效的隔离措施，模块参数通过拨码开关、按键和指示灯来进行设置。 - A New Meter Dial Indicator Detection Method Based on Center-point Projection
一种仪表指针位置检测的中心投影法 - The paper begins with the analysis of measurement errors of parallelism of dovetail slots, then studies the working principle and the ratio of amplification for dial test indicator. Various of factors resulting in errors are discussed, and a method of error correction is proposed.
从分析工件燕尾槽平行度测量误差入手，深入研究杠杆千分表工作原理和传动放大比公式，讨论了产生误差的各种因素，并提出了校正误差的相应方法。 - As a kind of measuring the length and displacement of tools, the dial indicator is widely used to measure the geometric shape error and the position error.
百分表作为一种测量长度、位移的工具，广泛用于测量工件几何形状误差及位置误差。 - This test uses static load device, and uses strain gauge and strain collection device to acquisition of steel and concrete strain change. At the same time, it uses dial indicator to measure the deflection of underpinning beam.
采用静力加载装置加载，使用应变片及应变采集仪来采集钢筋和混凝土的应变变化，使用百分表测量试验中托换梁的位移。 - In this chapter we also introduces the dial indicator of mechanical structure, system hardware structure and system composition and principle.
在该章节中介绍了百分表检定系统的机械结构、硬件结构以及系统的组成及原理。 - At the same time this chapter have a detailed analysis of the dial indicator verification system principle and specific verification method.
同时详细分析了百分表检定系统的工作原理及具体检定方法。 - According to the relevant provisions in China standard and specifications, this Chapter puts forward the design ideas and verification of dial indicator design task.
根据我国相关国标及规范规定，提出了百分表检定的设计思路和设计任务。 - The first six chapters detail the dial indicator design theory and method of each part, Finally in the chapter seven, concluded that the system hardware and software test dial indicator verification results and achieve the performance index.
文中前六章详细说明了百分表各部分设计的理论基础和实现方法，最后第七章中说明百分表检定系统实现的功能及达到的性能指标，提出了升级、改进百分表检定系统需要完成的工作。 - In the verification of dial indicator, displacement is critical.
在百分表的检定中，位移基准非常关键，它是百分表示值误差检定的依据。 - Summarized the research situation dial indicator verification. Also, the first chapter introduces the significance of this research.
综述了百分表检定的研究现状。同时也介绍了本课题研究的意义。 - Due to the use of high frequency, the dial indicator produce error easily.
由于使用频率高，百分表很容易产生误差。 - The traditional PID controller algorithm for computing speed is too slow and overshoot. It can not be applied to drive a large part in some of the instruments ( dial indicator) and special equipment ( CNC).
传统的PID算法因控制器运算速度过慢存在超调量，不能适用于传动部件间隙大的在一些仪器（百分表）和特殊设备（数控机床）上。 - So the verification and correction of dial indicator appears very important.
因此，对百分表进行检定和修正就显得非常重要。